Identity
Part and Equipment Reference
Condition
Wear and Alterations
Geometry
Profile and Mounting
Requirement
Application and Quantity
When a Physical Sample Supports Review
SENTHAI’s JOMA-style product page states that customization is available per drawings, samples or required specifications. A sample provides physical reference information, but the project requirements still need to be confirmed.
01
No Controlled Drawing
An existing blade can show the overall construction, profile, mounting features and relationships that may not be available in a controlled technical drawing.
02
Configuration Needs Clarification
A physical reference can help explain features that are difficult to communicate in a single photograph, part description or equipment-model reference.
03
Existing Part as Reference
A known blade or cutting-edge section can support comparison when the required new condition, application and mounting information are documented separately.
Prepare a Record Before the Sample Moves
Document the existing condition before cleaning, repair, disassembly or transport changes what the sample shows. The record should identify which end and face are used as references.
Photograph the complete sample
Capture the front, back, both ends, mounting pattern, identification marks and any separate components in one consistent orientation.
Record confirmed measurements
Include overall length, height, thickness, hole or slot size, center positions and reference-edge distances. State the units clearly.
Identify visible condition
Mark wear, deformation, repairs, added holes, removed material or other changes so the measured sample is not automatically treated as the intended new geometry.
Give the Sample a Clear Reference
Use a simple project reference that matches the photographs, measurements, drawing files and inquiry form.
Project Reference
Use one consistent reference name or number across the sample record and all supporting files.
Orientation
Identify front, back, left, right, top, bottom and the reference end used for measurements.
Equipment Context
Record the plow, mounting arrangement, existing part number or other application information available.
Sample Condition
Note whether the reference is worn, damaged, repaired, modified or incomplete.
Information to Include with a Sample-Based Request
The physical item is only one part of the review. Connect it to the technical and commercial requirement.
Contact
Company and Contact Details
Identify the company, responsible contact and project reference used for communication.
Technical
Measurements and Files
Include confirmed dimensions, photographs, drawings, part references and available mounting information.
Application
Equipment and Operating Context
Describe where the blade is used and any project-specific configuration that needs review.
Commercial
Quantity and Destination
State the estimated quantity and delivery country or destination for the actual inquiry.
A Worn Sample Is Evidence, Not an Automatic Final Specification
Service wear, impact, previous repair and field modification can change the measured shape. Keep the observed condition separate from the required new configuration.
Record what exists
Measure and photograph the actual sample without hiding wear, deformation or alterations.
State what is required
Identify the intended application, mounting arrangement and any requirement that should not simply copy the worn condition.
Confirm the reviewed configuration
Feasibility, dimensions, compatibility and commercial terms must be confirmed for the specific project before manufacturing.
Confirm the Review Route Before Arranging Shipment
Use the inquiry form to share the sample record first. Confirm the required information, destination and handling instructions for the actual project before sending a physical item.
Complete the Supporting Record
Use the measurement, photography and drawing guides to prepare information that can be matched to the same sample reference.
Snow Plow Blade Sample Questions
Use the sample to support review while keeping the intended new requirements clearly documented.
Does SENTHAI support customization from a physical sample?
Yes. SENTHAI’s JOMA-style product page states that customization services are available per drawings, samples or required specifications. The actual feasibility, configuration and commercial terms must be confirmed for each request.
Can a physical sample replace all drawings and measurements?
Not automatically. A sample provides physical reference information, while confirmed dimensions, mounting information, photographs and project requirements help distinguish the intended new configuration from the sample’s current condition.
Should a worn sample be copied exactly?
No. Record wear, damage, repairs and modifications, then identify which features belong to the intended new blade. Final geometry should be confirmed during the project review.
Should the sample be cleaned or repaired before review?
Do not alter evidence that helps explain the current condition before it is photographed and recorded. Any cleaning, handling or transport preparation should follow safe procedures appropriate to the actual item.
Does sending a sample guarantee compatibility or production approval?
No. A sample supports review. Compatibility, feasibility, dimensions, quantity, pricing and delivery terms depend on the complete project information and confirmed configuration.
Request a Sample-Based Review
Send the available information before arranging delivery of a physical sample.
✓ Complete sample photographs
✓ Confirmed dimensions and mounting information
✓ Part number, drawing or equipment reference
✓ Description of wear, repair or modification
✓ Estimated quantity and delivery country
Email: [email protected]